Pixel FlexLED 24V Grouped Chip Control RGBW 5600k Indoor 72 LEDs/Meter

72 LED/Meter RGB+W High CRI PixelFlex LED Tape in 24V DC

A worlds first! High CRI Pixel FlexLED. This product uses the same LED chips as our standard FlexLED RGBW AIO LEDs but is controlled every 6 LEDs.
This is our brightest Pixel FlexLED and at 24VDC allows for longer runs of LED while still allowing for dazzling effects and endless possibilities.
Control these strips with our PixlArt 416 controller via ArtNet or sACN data signals.
This pixel control product is lower frequency, meaning it may flicker on camera depending on your camera settings.

Soldering Guidelines:
Soldering iron should be between 360°C and 372°C.  Please ensure not to heat each solder pad for longer than 3 seconds otherwise separation of the solder pads can occur.

Indoor and weatherproof strips have 3M double-sided tape on the back which makes installation as easy as peel n stick. 

Waterproof must be mounted using silicone glue or similar.
Controller, power supply and extension cables sold separately
Quantity discounts and custom color temperatures available.