Pixel FlexLED 5V High Frequency Indoor Bare end wires 60 LEDs/Meter
60, 72, and 144 LED/Meter PixelFlex LED Tape in 5V DC
High frequency and high quality APA-102C chips provide individual control to each pixel for dazzling effects and endless possibilities. Control these strips with our PixlArt 416 controller via ArtNet or sACN data signals.
Suitable for on-camera use and flicker-free up to 1000 fps at most camera settings.
Soldering Guidelines:
Soldering iron should be between 360°C and 372°C. Please ensure not to heat each solder pad for longer than 3 seconds otherwise separation of the solder pads can occur.
Indoor and weatherproof strips have 3M double-sided tape on the back which makes installation as easy as peel n stick.
Waterproof must be mounted using silicone glue or similar.
Controller, power supply and extension cables sold separately
Quantity discounts and custom color temperatures available.
| Product Type | : | 60 LED/meter |
| Product Code | : | I5VRGB300APA102 |
| CRI | : | N/A |
| Kelvin | : | RGB |
| PCB Color | : | Black |
| Current, Rating | : | 3.6 A / meter |
| Voltage | : | 5 VDC |
| Wattage | : | 18 W / meter |
| CC / CV | : | Constant Voltage |
| IP Rating | : | IP43 |
| Lumens @ Full | : | 216 |
| Lumen / Watt | : | 12 |
| Lifetime* | : | 30,000 hours |
| Cutting Length | : | Individual LED |
| LED Quantity | : | 60 LED / meter |
| Number of Contacts | : | 4 |
| LED Type | : | APA-102C |
| Copper Quantity | : | 3 Oz. |
| Temperature, Operating, Maximum | : | 70 C |
| Temperature, Operating, Minimum | : | -40 C |
| Agency Ratings | : | UL - E489028, CE, RoHS |
| PCB Width | : | 10 MM |
| Maximum Recommended Length | : | 5 meters |
| Viewing Angle | : | 120 degree |
| Adhesion | : | 3M 300MP |
| Wavelength A | : | 620 ~ 625nm |
| Wavelength B | : | 522 ~ 525nm |
| Wavelength C | : | 467.5 ~ 470nm |
| Wavelength D | : | N/A |
| Data Transmission Speed | : | 1 MHZ |
| Refresh Rate | : | 30 FPS |
| Bit Rate | : | 32 Bit |
| Data Clock Frequency | : | 0 ~ 5 MHZ |